Cool ride eh? Most "surfers" only see my wake... but since you're a "web surfer" you get to see the front view.

Here are the Stock Specifications for the Blaster :

Here is the list of modifications I've done to the Blaster :

-removed stock exhaust pipe, added RIVA tuned exhaust pipe

-rerouted head water cooling hose (instead of routing hot water through the exhaust pipe like normal, I drilled a small 1/8" hole in the side of the hull & installed a water outlet so the water is routed directly out of the craft without cutting exhaust flow)

-removed carb choke plate & added a primer kit to improve air intake into the carb, also rejetted the carb

-replaced stock flame arrestor with an Ocean Pro Vortex flame arrestor to increase & concentrate air flow into carb

-replaced stock rev-limiter with an MSD rev-limiter (increased maximum revs by 500-800 rpm)

-replaced stock intake grate with a R&D scoop grate (to concentrate water intake to the impeller & help reduce cavitation)